CommercialRoofInspections
We start every project with a comprehensive roof inspection: infrared thermal imaging, core sampling, substrate condition assessment, and a written report with photos you can present to ownership or your board. We tell you whether your roof can be restored. If it cannot, we tell you that too — no upsell, no obligation.
The spec sheet
Your board
will read.
Every performance claim, documented. No marketing language.
| Performance Spec | Our SystemRoof Inspections |
|---|---|
Equipment | Professional-grade FLIR infrared cameras |
Method | Non-destructive thermal imaging + targeted core sampling |
Deliverable | Written report with thermal images, moisture maps, core analysis, photos |
Turnaround | Report delivered within 48 hours |
Coverage | Full roof surface scan + all flashings and penetrations |
Cost | No charge for qualifying properties over 10,000 sq ft |
Obligation | None — report is yours regardless of next steps |
Source: manufacturer product data sheets + third-party ASTM aging tests. Last updated this quarter.
What we can
restore.
If your deck substrate is listed, this service is a candidate. If it's not — or if moisture content exceeds 30% by volume — we'll tell you that too.
No surprises.
No pressure.
Just documented work.
We coordinate access with zero disruption to building operations. Infrared surveys conducted in early morning or evening for optimal thermal contrast.
Professional-grade infrared cameras scan the entire roof surface, identifying moisture intrusion patterns invisible to visual inspection.
Targeted core cuts confirm thermal findings, assess insulation condition, membrane adhesion, and deck integrity. All cores patched and sealed.
Documented report delivered within 48 hours — thermal images, moisture maps, core results, and a clear restore/repair/replace recommendation.
Projects where we
specified roof inspections.
Filtered case studies — every one used the system and process described on this page.
All five buildings restored in a single mobilization over 8 days.
The infrared documentation reversed the insurance denial.
Three buildings, one contract, 12 days.
Roof surface temperature reduced by 52°F.
Common questions
about this service.
Pulled verbatim from assessment calls on this specific service.
01Is the commercial roof inspection truly free?
Yes. For qualifying commercial properties over 10,000 square feet, the inspection — including thermal imaging, core sampling, and the written report
02What does the commercial roof inspection report include?
The report includes the full thermal image set with moisture mapping, core sample analysis with wet area calculations, a photo inventory of all identified failures, and a written recommendation with supporting data — restore, repair, or replace. Delivered within 48 hours of inspection in a format suitable for ownership or board presentation.
03Is infrared thermal inspection destructive?
No. The thermal scan is entirely non-destructive. Core samples are taken at targeted locations to confirm thermal findings — we take as few as needed to document the moisture map accurately. All cores are patched and sealed immediately. The roof is left in the same condition or better than when we arrived.
04Do I have to proceed with restoration after the inspection?
No. The inspection report belongs to you with no obligation attached to it. If your roof does not qualify for restoration, we tell you directly and recommend the appropriate path. If it does qualify, the decision of whether to proceed — and with whom — is entirely yours.
05How long does a commercial roof inspection take?
Thermal scans are typically conducted in early morning or after sunset when thermal contrast is highest. Field time ranges from two to four hours for most commercial buildings depending on roof size and complexity. The written report follows within 48 hours. No disruption to building operations during the inspection.
Everything
connected.
Related services, industries where this applies, and reference material.
Stop deferring.
Start restoring.
Get a documented roof assessment from a certified technician. We'll tell you exactly what your building needs, what it will cost, and whether this service makes financial sense — before you spend a dollar.